Remote IoT Blynk: suhu dan penerangan ruang laboratorium keperawatan
DOI:
https://doi.org/10.31571/saintek.v11i2.4720Keywords:
Microcontroller NodeMCU esp8266, Temperature Sensor DS18B20, Blynk, IoTAbstract
Penelitian ini bertujuan untuk mengembangkan sebuah alat monitoring dan kendali suhu serta penerangan ruangan yang berbasis Internet of Things (IoT) dan menggunakan Blynk. Bentuk penelitian ini adalah penelitian dan pengembangan yang terdiri dari beberapa tahapan, yaitu: Tahap perancangan alat kendali yang terdiri dari sensor DS18B20, Liquid Crystal Display (LCD), relay, Light Emitting Diode (LED), dan buzzer kemudian dihubungkan ke microcontroller NodeMCU esp8266. Perangkat yang akan dikendalikan yaitu lampu dan Air Conditioner (AC) yang dihubungkan langsung ke relay sebagai output. Tahap perancangan aplikasi monitoring serta kendali menggunakan platform blynk berbasis android yang dipasang pada smartphone. Setelah dilakukan pengujian pada hardware dan software, hasilnya rata-rata waktu respon untuk menghidupkan lampu sebesar 1,09 detik, dan untuk mematikan lampu sebesar 0,95 detik. Rata-rata waktu respon untuk menghidupkan AC sebesar 0,97 detik, dan untuk mematikan AC sebesar 1,04 detik. Alat ini tidak hanya dapat mengukur suhu ruangan, tetapi dapat juga digunakan sebagai alat ukur suhu tubuh pada manusia. Sistem ini dapat dimodifikasi untuk penghematan energi dan biaya.
Downloads
References
Arrafat, S., & Wildian, W. (2021). Rancang bangun sistem telemetri pemantauan temperatur tubuh pasien menggunakan sensor DS18B20 dan Tranceiver nRF24L01+. Jurnal Fisika Unand, 10(2), 198–204. https://doi.org/10.25077/jfu.10.2.198-204.2021
Asmawati, A., Putra, F. J. E., & Richie, L. (2019). Control led through internet based on nodemcu with blynk application. Aptisi Transactions On Technopreneurship (ATT), 1(2), 170–179. https://doi.org/10.34306/att.v1i2.79
Budiyanto, A., Pramudita, G. B., & Adinandra, S. (2020). Kontrol relay dan kecepatan kipas angin direct current (DC) dengan sensor suhu LM35 berbasis internet of things (IoT). Techné : Jurnal Ilmiah Elektroteknika, 19(01), 43–54. https://doi.org/10.31358/techne.v19i01.224
Burhannudin, A., Darmawan, I. N., Yulianto, P., & Sudaryanto, E. (2022). Sistem Kendali Lampu Dengan Teknologi Internet Of Things ( IOT ) Dan Bluetooth Menggunakan NODEMCU.
Hailan, M. A., Albaker, B. M., & Alwan, M. S. (2023). Transformation to a smart factory using NodeMCU with Blynk platform. Indonesian Journal of Electrical Engineering and Computer Science, 30(1), 237–245. https://doi.org/10.11591/ijeecs.v30.i1.pp237-245
Hayaty, M., & Mutmainah, A. R. (2019). IoT-Based electricity usage monitoring and controlling system using Wemos and Blynk application. Jurnal Teknologi Dan Sistem Komputer, 7(4), 161–165. https://doi.org/10.14710/jtsiskom.7.4.2019.161-165
Nasution, A. H. M., Indriani, S., Fadhilah, N., Arifin, C., & Tamba, S. P. (2019). Pengontrolan Lampu Jarak Jauh Dengan Nodemcu Menggunakan Blynk. Jurnal TEKINKOM, 2, 93–98.
Shafique, K., Khawaja, B. A., Sabir, F., Qazi, S., & Mustaqim, M. (2020). Internet of things (IoT) for next-generation smart systems: A review of current challenges, future trends and prospects for emerging 5G-IoT Scenarios. IEEE Access, 8, 23022–23040. https://doi.org/10.1109/ACCESS.2020.2970118
Sumarjono, A. (2018). Sistem monitoring dan pengendalian suhu ruangan di laboratorium dengan menggunakan labview berbasis arduino. Integrated Lab Journal, 06(1405), 19–28.
Suyanto Moh Fajar Rajasa, S. F. (2013). Rancang Bangun Prototipe Monitoring Suhu Tubuh Manusia Berbasis O.S Android Menggunakan Koneksi Bluetooth. Jurnal Teknik ITS, 2(Vol 2, No 1 (2013)), A213–A216. http://ejurnal.its.ac.id/index.php/teknik/article/view/3275
Wirawan, I. M. A., Santyadiputra, G. S., & Sugihartini, N. (2017). SISTEM PEMANTAU SUHU LAB JARAK JAUH BERBASIS ARDUINO
Downloads
View: 394
Download: 176
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Nazuarsyah, Ully Muzakir, Mukhroji, Rossiana Br Ginting, Wahyu Saputra
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal. Please also carefully read Jurnal Pendidikan Informatika dan Sains Posting Your Article Policy at http://journal.ikippgriptk.ac.id/index.php/saintek/about/submissions#onlineSubmissions
- That it is not under consideration for publication elsewhere,
- That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Copyright
Authors who publish with Jurnal Pendidikan Informatika dan Sains agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
